Set Snmp Notify; Show Snmp Notify Output Details - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Parameters
notify
volatile |
nonvolatile | read‐
only
Defaults
If a notify name is not specified, all entries will be displayed.
If volatile, nonvolatile, or read‐only are not specified, all storage type entries will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display the SNMP notify information:
C2(su)->show snmp notify
--- SNMP notifyTable information ---
Notify name
Notify Tag
Notify Type
Storage type
Row status
Notify name
Notify Tag
Notify Type
Storage type
Row status
Table 8‐10 provides an explanation of the command output.
Table 8-10 show snmp notify Output Details
Output Field
Notify name
Notify Tag
Notify Type
Storage type
Row status

set snmp notify

Use this command to set the SNMP notify configuration. This creates an entry in the SNMP notify
table, which is used to select management targets who should receive notification messages. This
(Optional) Displays notify entries for a specific notify name.
(Optional) Displays notify entries for a specific storage type.
= 1
= Console
= trap
= nonVolatile
= active
= 2
= TrapSink
= trap
= nonVolatile
= active
What It Displays...
A unique identifier used to index the SNMP notify table.
Name of the entry in the SNMP notify table.
Type of notification: SNMPv1 or v2 trap or SNMPv3 InformRequest
message.
Whether access entry is stored in volatile, nonvolatile, or read-only
memory.
Status of this entry: active, notInService, or notReady.
set snmp notify
SecureStack C2 Configuration Guide 8-31