Clear Spantree Msti; Show Spantree Mstmap - Enterasys SecureStack C2 C2G170-24 Configuration Manual

clear spantree msti

Use this command to delete one or more Multiple Spanning Tree instances.
Syntax
clear spantree msti [sid sid]
Parameters
sid sid
Defaults
If sid is not specified, all MST instances will be cleared.
Mode
Switch command, read‐write.
Example
This example shows how to delete all MST instances:
C2(su)->clear spantree msti

show spantree mstmap

Use this command to display the mapping of a filtering database ID (FID) to a Spanning Trees.
Since VLANs are mapped to FIDs, this shows to which SID a VLAN is mapped.
Syntax
show spantree mstmap [fid fid]
Parameters
fid fid
Defaults
If fid is not specified, information for all assigned FIDs will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display SID to FID mapping information for FID 1. In this case, no
new mappings have been configured:
C2(su)->show spantree mstmap fid 1
FID:
1
(Optional) Deletes a specific multiple Spanning Tree ID.
(Optional) Displays information for specific FIDs.
SID:
0
clear spantree msti
SecureStack C2 Configuration Guide 9-13