Enterasys SecureStack C2 C2G170-24 Configuration Manual page 284

clear spantree adminedge
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to reset ge.1.11 as a non‐edge port:
C2(su)->clear spantree adminedge
9-40 Spanning Tree Configuration
Specifies port(s) on which to reset edge port status. For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 7‐2.
ge.
1.11