Show Snmp Access Output Details - Enterasys SecureStack C2 C2G170-24 Configuration Manual

show snmp access
context context
volatile |
nonvolatile | read‐
only
Defaults
If groupname is not specified, access information for all SNMP groups will be displayed.
If security‐model is not specified, access information for all SNMP versions will be displayed.
If noauthentication, authentication or privacy are not specified, access information for all
security levels will be displayed.
If context is not specified, all contexts will be displayed.
If volatile, nonvolatile or read‐only are not specified, all entries of all storage types will be
displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display SNMP access information:
C2(su)->show snmp access
Group
Security model
Security level
Read View
Write View
Notify View
Context match
Storage type
Row status
Group
Security model
Security level
Read View
Write View
Notify View
Context match
Storage type
Row status
Table 8‐6 provides an explanation of the command output.
Table 8-6 show snmp access Output Details
Output Field
Group
Security model
8-16 SNMP Configuration
(Optional) Displays access information for a specific context. For a
description of how to specify SNMP contexts, refer to "Using SNMP
Contexts to Access Specific MIBs" on page 8‐3.
(Optional) Displays access entries for a specific storage type.
= SystemAdmin
= USM
= noAuthNoPriv
= All
=
= All
= exact match
= nonVolatile
= active
= NightOperator
= USM
= noAuthNoPriv
= All
=
= All
= exact match
= nonVolatile
= active
What It Displays...
SNMP group name.
Security model applied to this group. Valid types are: SNMPv1,
SNMPv2c, and SNMPv3 (User based - USM).