Show Mac Agetime; Show Mac Output Details - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Defaults
If no parameters are specified, all MAC addresses for the device will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display MAC address information for
C2(su)->show mac port ge.3.1
MAC Address
----------------- ---- ------------- --------
00-09-6B-0F-13-E6 15
MAC Address
----------------- ---- ------------- ------- ------- ---------------------------
01-01-23-34-45-56 20
Table 14‐6 provides an explanation of the command output.
Table 14-6 show mac Output Details
Output Field
MAC Address
FID
Port
Type
VLAN
Status
Egress Ports

show mac agetime

Use this command to display the timeout period for aging learned MAC entries.
Syntax
show mac agetime
Parameters
None.
FID Port
ge.3.1
VLAN Port
any
What It Displays...
MAC addresses mapped to the port(s) shown.
Filter database identifier.
Port designation.
Address type. Valid types are:
• Learned
• Self
• Management
• Other (this will include any static MAC locked addresses as described in
"Configuring MAC Locking" on page 23-50).
• mcast (multicast)
The VLAN ID configured for the multicast MAC address.
The status of the multicast address.
The ports which have been added to the egress ports list.
ge
Type
Learned
Type Status Egress Ports
mcast perm ge.3.1
SecureStack C2 Configuration Guide 14-21
show mac agetime
.3.1: