Clear Port Protected Name - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Example
This example shows how to show the name of protected port group 1:
C2(ro)->show port protected name 1
Group ID
-----------------------------
1

clear port protected name

Use this command to clear the name of a protected group.
Syntax
clear port protected name group-id
Parameters
group‐id
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the name of protected port group 1:
C2(rw)->clear port protected name 1
Group Name
group1
Specifies the id of the group for which to clear the name. Id can range
from 0 to 2.
clear port protected name
SecureStack C2 Configuration Guide 7-55