Show Arpinspection Statistics - Enterasys SecureStack C2 C2G170-24 Configuration Manual

show arpinspection statistics

Example
This example displays ARP configuration information for VLAN 5.
C2(su)->show arpinspection vlan 5
Source MAC Validation
Destination MAC Validation
IP Address Validation
Vlan
----
5
show arpinspection statistics
Use this command to display ARP statistics for all DAI‐enabled VLANs or for specific VLANs.
Syntax
show arpinspection statistics [vlan vlan-range]
Parameters
vlan vlan‐range
Defaults
If no VLANs are specified, limited statistics for all DAI‐enabled VLANs is displayed.
Mode
Switch command, read‐write.
Usage
When no specific VLANs are entered, this command displays the number of Forwarded and
Dropped ARP packets per DAI‐enabled VLAN. When one or more VLANs are specified, this
command displays more detailed statistics.
Examples
This example shows what is displayed when no VLANs are specified.
C2(su)->show arpinspection statistics
VLAN
----
5
This example shows what information is displayed when one or more VLANs are specified.
C2(su)->show arpinspection statistics vlan 5
VLAN
---- ---------- ---------- ---------- ---------- ---------- ---------- ---------
5
17-26 DHCP Snooping and Dynamic ARP Inspection
Configuration Log Invalid
------------- ----------- --------------------------------
Disabled Enabled
(Optional) Specifies the VLANs for which to display statistics.
Forwarded Dropped
------------ ---------
0
DHCP ACL
Drops Drops
0 0
ACL Name
0
DHCP ACL
Permits Permits
0 0
Disabled
Disabled
Disabled
Static flag
-----------
staticARP
Bad Src Bad Dest
MAC MAC
0
Enabled
Invalid
IP
0 0