Configuring Snmp Access Rights; Purpose; Commands; Show Snmp Access - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to delete the community name "vip."
C2(su)->clear snmp community vip

Configuring SNMP Access Rights

Purpose

To review and configure SNMP access rights, assigning viewing privileges and security levels to
SNMP user groups.

Commands

For information about...

show snmp access

set snmp access
clear snmp access
show snmp access
Use this command to display access rights and security levels configured for SNMP one or more
groups.
Syntax
show snmp access [groupname] [security-model {v1 | v2c | usm}] [noauthentication
| authentication | privacy] [context context] [volatile | nonvolatile | read-only]
Parameters
groupname
security‐model v1 |
v2c | usm
noauthentication |
authentication |
privacy
(Optional) Displays access information for a specific SNMPv3 group.
(Optional) Displays access information for SNMP security model version
1, 2c or 3 (usm).
(Optional) Displays access information for a specific security level.
Configuring SNMP Access Rights
Refer to page...
8-15
8-17
8-18
SecureStack C2 Configuration Guide 8-15