Save Config; Dir - Enterasys SecureStack B3 Configuration Manual

save config

Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the configuration persistence mode to manual:
B3(su)->set snmp persistmode manual
save config
Use this command to save the running configuration. If applicable, this command will save the
configuration to all switch members in a stack.
Syntax
save config
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to save the running configuration:
B3(su)->save config

dir

Use this command to list configuration and image files stored in the file system.
Syntax
dir [filename]
Parameters
filename
Defaults
If filename is not specified, all files in the system will be displayed.
Mode
Switch command, read‐only.
3-42 Basic Configuration
(Optional) Specifies the file name or directory to list.