Commands; Set Port Disable; Set Port Enable - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Commands

For information about...

set port disable

set port enable

show port alias
set port alias
set port disable
Use this command to administratively disable one or more ports. When this command is
executed, in addition to disabling the physical Ethernet link, the port will no longer learn entries
in the forwarding database.
Syntax
set port disable port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to disable ge.1.1:
C2(su)->set port disable
set port enable
Use this command to administratively enable one or more ports.
Syntax
set port enable port-string
Parameters
port‐string
Defaults
None.
Specifies the port(s) to disable. For a detailed description of possible port‐
string values, refer to "Port String Syntax Used in the CLI" on page 7‐2.
ge.
1.1
Specifies the port(s) to enable. For a detailed description of possible port‐
string values, refer to "Port String Syntax Used in the CLI" on page 7‐2.
set port disable
Refer to page...
7-7
7-7
7-8
7-8
SecureStack C2 Configuration Guide 7-7