Show Dhcp Binding; Clear Dhcp Binding - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Example
This example resets the number of ping packets sent back to the default value.
C2(rw)->clear dhcp ping packets

show dhcp binding

Use this command to display binding information for one or all IP addresses.
Syntax
show dhcp binding [ip-address]
Parameters
ip‐address
Defaults
If no IP address is specified, binding information for all addresses is displayed.
Mode
Read‐only.
Example
This example displays binding information about all addresses.
C2(rw)->show dhcp binding
IP address
-----------
192.0.0.6
192.0.0.8
192.0.0.10
192.0.0.11
192.0.0.12
192.0.0.13
192.0.0.14

clear dhcp binding

Use this command to clear (delete) one or all DHCP address bindings.
Syntax
clear dhcp binding {ip-addr | *}
Parameters
ip‐addr
*
Defaults
None.
(Optional) Specifies the IP address for which to display binding
information.
Hardware Address
-----------------
00:33:44:56:22:39
00:33:44:56:22:33
00:33:44:56:22:34
00:33:44:56:22:35
00:33:44:56:22:36
00:33:44:56:22:37
00:33:44:56:22:38
Specifies the IP address for which to clear/delete the DHCP binding.
Deletes all address bindings.
Lease Expiration
-----------------
00:11:02
00:10:22
00:09:11
00:10:05
00:10:30
infinite
infinite
SecureStack C2 Configuration Guide 16-9
show dhcp binding
Type
-----
Automatic
Automatic
Automatic
Automatic
Automatic
Manual
Manual