Set Dhcp Pool Dns-Server; Clear Dhcp Pool Dns-Server - Enterasys SecureStack C2 C2G170-24 Configuration Manual

set dhcp pool dns-server

Mode
Switch command, read‐write.
Example
This example removes the default router from the address pool "auto1."
C2(rw)->clear dhcp pool auto1 default-router
set dhcp pool dns-server
Use this command to specify one or more DNS servers for the DHCP clients served by the address
pool being configured. Up to 8 DNS servers can be configured.
Syntax
set dhcp pool poolname dns-server address [address2 ... address8]
Parameters
poolname
address
address2 ... address8
Defaults
None.
Mode
Switch command, read‐write.
Example
This example assigns a DNS server at 10.14.10.1 to the address pool "'auto1."
C2(rw)->set dhcp pool auto1 dns-server 10.14.10.1

clear dhcp pool dns-server

Use this command to remove the DNS server list from the address pool being configured.
Syntax
clear dhcp pool poolname dns-server
Parameters
poolname
Defaults
None.
16-24 DHCP Server Configuration
Specifies the name of the address pool. Pool names may be up to 31
characters in length.
Specifies the IP address of a DNS server.
(Optional) Specifies, in order of preference, up to 7 additional DNS
server addresses.
Specifies the name of the address pool. Pool names may be up to 31
characters in length.