Set Macauthentication; Set Macauthentication Password - Enterasys SecureStack C2 C2G170-24 Configuration Manual

set macauthentication

Table 23-4 show macauthentication session Output Details (Continued)
Output Field
Duration
Reauth Period
Reauthentications
set macauthentication
Use this command to globally enable or disable MAC authentication.
Syntax
set macauthentication {enable | disable}
Parameters
enable | disable
Mode
Switch command, read‐write.
Defaults
None.
Example
This example shows how to globally enable MAC authentication:
C2(su)->set macauthentication enable

set macauthentication password

Use this command to set a MAC authentication password.
Syntax
set macauthentication password password
Parameters
password
Defaults
None.
Mode
Switch command, read‐write.
23-24 Authentication and Authorization Configuration
What It Displays...
Time this session has been active.
Reauthentication period for this port, set using the set macauthentication
reauthperiod command described in
page 23-29.
Whether or not reauthentication is enabled or disabled on this port. Set using the set
macauthentication reauthentication command described in
macauthentication reauthentication" on page 23-28.
Globally enables or disables MAC authentication.
Specifies a text string MAC authentication password.
"set macauthentication reauthperiod" on
"set