Table of Contents
Advertisement
Example
This example shows how to create an RMON channel entry:
C2(rw)->set rmon channel 54313 ge.2.12 accept failed control on description
"capture all"
clear rmon channel
Use this command to clear an RMON channel entry.
Syntax
clear rmon channel index
Parameters
index
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear RMON channel entry 2:
C2(rw)->clear rmon channel 2
show rmon filter
Use this command to display one or more RMON filter entries.
Syntax
show rmon filter [index index | channel channel]
Parameters
index index |
channel channel
Defaults
If no options are specified, information for all filter entries will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display all RMON filter entries and channel information:
Specifies the channel entry to be cleared.
(Optional) Displays information about a specific filter entry, or about all
filters which belong to a specific channel.
clear rmon channel
SecureStack C2 Configuration Guide 15-19
Advertisement
Table of Contents
