Set Vlan Name; Clear Vlan - Enterasys SecureStack C2 C2G170-24 Configuration Manual

set vlan name

set vlan name
Use this command to set or change the ASCII name for a new or existing VLAN.
Syntax
set vlan name vlan-list vlan-name
Parameters
vlan‐list
vlan‐name
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the name for VLAN 7 to green:
C2(su)->set vlan name 7 green

clear vlan

Use this command to remove a static VLAN from the list of VLANs recognized by the device.
Syntax
clear vlan vlan-list
Parameters
vlan‐list
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to remove a static VLAN 9 from the device's VLAN list:
C2(su)->clear vlan 9
10-6 802.1Q VLAN Configuration
Specifies the VLAN ID of the VLAN(s) to be named.
Specifies the string used as the name of the VLAN (1 to 32 characters).
Specifies the VLAN ID of the VLAN(s) to be removed.