Clear Rmon Stats - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Defaults
If owner is not specified, monitor will be applied.
Mode
Switch command, read‐write.
Example
This example shows how to configure RMON statistics entry 2 for ge.1.20:
C2(rw)->set rmon stats 2 ge.1.20

clear rmon stats

Use this command to delete one or more RMON statistics entries.
Syntax
clear rmon stats {index-list | to-defaults}
Parameters
index‐list
to‐defaults
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to delete RMON statistics entry 2:
C2(rw)->clear rmon stats 2
Specifies one or more stats entries to be deleted, causing them to disappear
from any future RMON queries.
Resets all history entries to default values. This will cause entries to
reappear in RMON queries.
clear rmon stats
SecureStack C2 Configuration Guide 15-5