Clear Spantree Portadmin; Show Spantree Portadmin - Enterasys SecureStack C2 C2G170-24 Configuration Manual

clear spantree portadmin

Example
This example shows how to disable Spanning Tree on ge.1.5:
C2(rw)->set spantree portadmin
clear spantree portadmin
Use this command to reset the default Spanning Tree admin status to enable on one or more ports.
Syntax
clear spantree portadmin port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to reset the default Spanning Tree admin state to enable on ge.1.12:
C2(rw)->clear spantree portadmin

show spantree portadmin

Use this command to display the status of the Spanning Tree algorithm on one or more ports.
Syntax
show spantree portadmin [port port-string]
Parameters
port port‐string
Defaults
If port‐string is not specified, status will be displayed for all ports.
Mode
Switch command, read‐only.
9-34 Spanning Tree Configuration
ge.
1.5 disable
Resets the default admin status on specific port(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 7‐2.
ge.
1.12
(Optional) Displays status for specific port(s). For a detailed description of
possible port‐string values, refer to "Port String Syntax Used in the CLI"
on page 7‐2.