Related Documents; Conventions Used In This Guide - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Chapter
routing protocols, including RIP, OSPF, DVMRP, IRDP, and VRRP.
Chapter
level.
Chapter
the suggested procedure to configure a mixed C2 and C3 stack to use IPv6 proxy routing.
Chapter
authentication using EAPOL, how to configure RADIUS server, Secure Shell server, MAC
authentication, MAC locking, Port Web Authentication, and IP access control lists (ACLs).

Related Documents

The following Enterasys Networks documents may help you to set up, control, and manage the
SecureStack device:
• Enterasys Firmware Feature Guides
• SecureStack C2 Installation Guide(s)
• SecureStack C2 Redundant Power System Installation Guide
Documents listed above, can be obtained from the World Wide Web in Adobe Acrobat Portable
Document Format (PDF) at the following web site:
http://www.enterasys.com/support/manuals/

Conventions Used in This Guide

The following conventions are used in the text of this document:
Convention
Bold font
italic font
Courier font
Courier font in italics
[ ]
{ }
|
[x | y | z]
{x | y | z}
[x {y | z} ]
The following icons are used in this guide:
20, IPv4 Routing Protocol Configuration, describes how to configure IP routing and
21, IPv6 Management, describes the commands used to configure IPv6 at the switch
22, IPv6 Proxy Routing, describes the commands used to enable IPv6 proxy routing and
23, Authentication and Authorization Configuration, describes how to configure 802.1X
Description
Indicates mandatory keywords, parameters or keyboard keys.
Indicates complete document titles.
Used for examples of information displayed on the screen.
Indicates a user-supplied value, either required or optional.
Square brackets indicate an optional value.
Braces indicate required values. One or more values may be required.
A vertical bar indicates a choice in values.
Square brackets with a vertical bar indicate a choice of a value.
Braces with a vertical bar indicate a choice of a required value.
A combination of square brackets with braces and vertical bars indicates a
required choice of an optional value.
Note: Calls the reader's attention to any item of information that may be of special importance.
Related Documents
SecureStack C2 Configuration Guide xxxi