Delete; Show Tftp Settings - Enterasys SecureStack C2 C2G170-24 Configuration Manual

delete

delete
Use this command to remove an image or a CLI configuration file from the switch.
Syntax
delete filename
Parameters
filename
Defaults
None.
Mode
Switch command, read‐write.
Usage
Use the dir command (page 3‐40) to display current image and configuration file names.
Example
This example shows how to delete the "Jan1_2004.cfg" configuration file:
C2(su)->delete configs/Jan1_2004.cfg

show tftp settings

Use this command to display TFTP settings used by the switch during data transfers using TFTP.
Syntax
show tftp settings
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Usage
The TFTP timeout value can be set with the set tftp timeout command. The TFTP retry value can
be set with the set tftp retry command.
3-44 Basic Configuration
Specifies the local path name to the file. Valid directories are /images and
/configs.44.