Performing A Partial Keyword Lookup; Displaying Scrolling Screens; Scrolling Screen Output; Abbreviating And Completing Commands - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Entering a question mark (?) without a space after a partial keyword will display a list of
commands that begin with the partial keyword. Figure
commands beginning with co:
Figure 1-4

Performing a Partial Keyword Lookup

C2(rw)->co?
configure
C2(su)->co
Note: At the end of the lookup display, the system will repeat the command you entered without the
?.

Displaying Scrolling Screens

If the CLI screen length has been set using the set length command as described on page 3‐28, CLI
output requiring more than one screen will display --More-- to indicate continuing screens. To
display additional screen output:
• Press any key other than ENTER to advance the output one screen at a time.
• Press ENTER to advance the output one line at a time.
The example in Figure
more than one screen.
Figure 1-5

Scrolling Screen Output

C2(su)->show mac
MAC Address
----------------------------------------------------------
00-00-1d-67-68-69
00-00-02-00-00-00
00-00-02-00-00-01
00-00-02-00-00-02
00-00-02-00-00-03
00-00-02-00-00-04
00-00-02-00-00-05
00-00-02-00-00-06
00-00-02-00-00-07
00-00-02-00-00-08
--More--

Abbreviating and Completing Commands

The SecureStack C2 switch allows you to abbreviate CLI commands and keywords down to the
number of characters that will allow for a unique abbreviation. Figure
abbreviate the show netstat command to sh net.
copy
1‐5 shows how the show mac command indicates that output continues on
FID Port
1 host
1 ge.1.2
1 ge.1.3
1 ge.1.4
1 ge.1.5
1 ge.1.6
1 ge.1.7
1 ge.1.8
1 ge.1.9
1 ge.1.10
Using the Command Line Interface
1‐4 shows how to use this function for all
Type
Management
Learned
Learned
Learned
Learned
Learned
Learned
Learned
Learned
Learned
1‐6 shows how to
SecureStack C2 Configuration Guide 1-9