Show Snmp Community - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Parameters
groupname
user
security‐model v1 |
v2c | usm
Defaults
If not specified, settings related to all security models will be cleared.
Mode
Switch command, read‐write.
Example
This example shows how to clear all settings assigned to the "public" user within the SNMP group
"anyone":
C2(su)->clear snmp group anyone public

show snmp community

Use this command to display SNMP community names and status. In SNMPv1 and v2,
community names act as passwords to remote management.
Syntax
show snmp community [name]
Parameters
name
Defaults
If name is not specified, information will be displayed for all SNMP communities.
Mode
Switch command, read‐only.
Example
This example shows how to display information about the SNMP "public" community name. For
a description of this output, refer to set snmp community (page 8‐14).
C2(su)->show snmp community public
--- Configured community strings ---
Name
Security name
Context
Transport tag
Storage type
Status
Specifies the SNMP group to be cleared.
Specifies the SNMP user to be cleared.
(Optional) Clears the settings associated with a specific security model.
(Optional) Displays SNMP information for a specific community name.
= *********
= public
=
=
= nonVolatile
= active
show snmp community
SecureStack C2 Configuration Guide 8-13