Show System Enhancedbuffermode; Set System Enhancedbuffermode - Enterasys SecureStack C2 C2G170-24 Configuration Manual

show system enhancedbuffermode

Type
---------------------------------------------------------------
RAM
Flash
This example shows how to display information about the processes running on the system. Only
partial output is shown.
C2(ro)->show system utilization process
Switch:1
TID
----------------------------------------------------------
c157930 ipMapForwardingTask
cc70000 RMONTask
ccb0b60 SNMPTask
d4847a0 tEmWeb
d4ca360 hapiRxTask
dec8600 lvl7TaskUtilMonitorTas
eb74120 bcmRX
eb7fbc8 bcmLINK.0
f00c9a0 bcmTX
f027648 bcmCNTR.0
f034858 bcmL2X.0
show system enhancedbuffermode
Use this command to display the status of enhanced buffer mode, which optimizes buffer
distribution into a single CoS queue operation for standalone switches or non‐stacked SecureStack
switches.
Syntax
show system enhancedbuffermode
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to display enhanced buffer mode status:
C2(su)->show system enhancedbuffermode enable
Optimized system buffer distribution

set system enhancedbuffermode

Use this command to enable or disable enhanced buffer mode, which optimizes buffer
distribution into a single CoS queue operation for standalone switches or non‐stacked SecureStack
3-16 Basic Configuration
Description
RAM device
Images, Config, Other
CPU:1
Name
Size(Kb) Available (Kb)
262144
31095
5Sec 1Min
3.60% 3.02% 3.48%
0.00% 0.00% 0.00%
34.80% 34.06% 31.78%
0.00% 0.03% 0.01%
3.20% 4.80% 5.00%
0.40% 0.40% 0.40%
2.00% 2.91% 4.48%
0.40% 0.22% 0.32%
0.00% 0.33% 0.53%
0.00% 0.00% 0.03%
0.00% 0.02% 0.04%
Disable
97173
8094
5Min