Table of Contents
Advertisement
Table 23-3 show macauthentication Output Details (Continued)
Output Field
Reauth Period
Auth Allowed
Auth Allocated
Reauthentications
show macauthentication session
Use this command to display the active MAC authenticated sessions.
Syntax
show macauthentication session
Parameters
None.
Defaults
If port‐string is not specified, MAC session information will be displayed for all MAC
authentication ports.
Mode
Switch command, read‐only.
Usage
Changing the Reauth Period with the set macauthentication reauthperiod command does not
affect current sessions. New sessions display the correct period.
Example
This example shows how to display MAC session information:
C2(su)->show macauthentication session
Port
-----
ge.1.2
Table
23‐4 provides an explanation of the command output.
Table 23-4 show macauthentication session Output Details
Output Field
Port
MAC Address
What It Displays...
Reauthentication period for this port. Default value of 30 can be changed using the
set macauthentication reauthperiod command (page 23-29).
Number of concurrent authentications supported on this port. Default is 1 and cannot
be reset.
Maximum number of MAC authentications permitted on this port. Default is 1 and
cannot be reset
Whether or not reauthentication is enabled or disabled on this port. Set using the set
macauthentication reauthentication command (page 23-28).
MAC Address
Duration
-----------------
---------- -------------
00:60:97:b5:4c:07
0,00:52:31
What It Displays...
Port designation. For a detailed description of possible port-string values, refer to
"Port String Syntax Used in the
MAC address associated with the session.
Reauth Period
Reauthentications
-----------------
3600
disabled
CLI" on page 7-2.
SecureStack C2 Configuration Guide 23-23
show macauthentication session
Advertisement
Table of Contents
