Set Policy Profile; Show Policy Profile Output Details - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Admin Profile Usage
Oper Profile Usage
Dynamic Profile Usage
Table 11‐1 provides an explanation of the command output.
Table 11-1 show policy profile Output Details
Output Field
Profile Index
Profile Name
Row Status
Port VID Status
Port VID Override
CoS
CoS Status
Egress VLANs
Forbidden VLANs
Untagged VLANs
Rule Precedence
Admin Profile Usage Ports administratively assigned to use this policy profile.
Oper Profile Usage
Dynamic Profile
Usage

set policy profile

Use this command to create a policy profile entry.
Syntax
set policy profile profile-index [name name] [pvid-status {enable | disable}]
[pvid pvid] [cos-status {enable | disable}] [cos cos] [precedence precedence-list]
Parameters
profile‐index
name name
pvid‐status
enable | disable
:Unknown(28),Unknown(29),Unknown(30),
:port(31)
: none
: none
: none
What It Displays...
Number of the profile.
User-supplied name assigned to this policy profile.
Whether or not the policy profile is enabled (active) or disabled.
Whether or not PVID override is enabled or disabled for this profile. If all
classification rules associated with this profile are missed, then this parameter, if
specified, determines default behavior.
The PVID assigned to packets, if PVID override is enabled.
CoS priority value to assign to packets, if CoS override is enabled.
Whether or not Class of Service override is enabled or disabled for this profile. If all
classification rules associated with this profile are missed, then this parameter, if
specified, determines default behavior.
VLAN(s) that ports to which the policy profile is assigned can use for tagged egress.
VLAN(s) forbidden to ports to which the policy profile is assigned.
VLAN(s) that ports to which the policy profile is assigned can use for untagged
egress.
Displays the precedence of types of rules.
Ports currently assigned to use this policy profile.
Port dynamically assigned to use this policy profile.
Specifies an index number for the policy profile. Valid values are 1 ‐ 255.
(Optional) Specifies a name for the policy profile. This is a string from 1 to
64 characters.
(Optional) Enables or disables PVID override for this profile. If all
classification rules associated with this profile are missed, then this
parameter, if specified, determines default behavior.
set policy profile
SecureStack C2 Configuration Guide 11-3