Show Port Alias; Set Port Alias - Enterasys SecureStack C2 C2G170-24 Configuration Manual

show port alias

Mode
Switch command, read‐write.
Example
This example shows how to enable ge.1.3:
C2(su)->set port enable
show port alias
Use this command to display the alias name for one or more ports.
Syntax
show port alias [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, aliases for all ports will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display alias information for ports 1‐3 on slot 3:
C2(rw)->show port alias ge.3.1-3
Port
Port
Port

set port alias

Use this command to assign an alias name to a port.
Syntax
set port alias port-string [name]
Parameters
port‐string
name
7-8 Port Configuration
ge.
(Optional) Displays alias name(s) for specific port(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 7‐2.
ge.3.1 user
ge.3.2 user
ge.3.3 Admin
Specifies the port to which an alias will be assigned. For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 7‐2.
(Optional) Assigns an alias name to the port. If the alias name contains
spaces, the text string must be surrounded by double quotes. Maximum
length is 60 characters.
1.3