Enterasys SecureStack C2 C2G170-24 Configuration Manual page 150

clear lldp port tx-tlv
poe
link‐aggr
max‐frame
med‐cap
med‐loc
med‐poe
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example disables the management address, MED capability, and MED location identification
TLVs from being sent in LLDPDUs by port
C2(rw)->clear lldp port tx-tlv mgmt-addr med-cap med-loc ge.1.1
6-30 Discovery Protocol Configuration
Disables the Power via MDI IEEE 802.3 Extensions TLV from being
transmitted in LLDPDUs. Only valid for PoE‐enabled ports.
Disables the Link Aggregation IEEE 802.3 Extensions TLV from being
transmitted in LLDPDUs.
Disables the Maximum Frame Size IEEE 802.3 Extensions TLV from
being transmitted in LLDPDUs.
Disables the LLDP‐MED Capabilities TLV from being transmitted in
LLDPDUs.
Disables the LLDP‐MED Location Identification TLV from being
transmitted in LLDPDUs.
Disables the LLDP‐MED Extended Power via MDI TLV from being
transmitted in LLDPDUs. Only valid for PoE‐enabled ports.
Specifies the port or range of ports to be affected.
1.1.
ge.