Table of Contents
Advertisement
clear rmon channel
accept matched |
failed
control on | off
description
description
owner owner
Defaults
If an action is not specified, packets will be accepted on filter matches.
If not specified, control will be set to off.
If a description is not specified, none will be applied.
If owner is not specified, it will be set to monitor.
Mode
Switch command, read‐write.
Example
This example shows how to create an RMON channel entry:
B3(rw)->set rmon channel 54313 ge.2.12 accept failed control on description
"capture all"
clear rmon channel
Use this command to clear an RMON channel entry.
Syntax
clear rmon channel index
Parameters
index
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear RMON channel entry 2:
B3(rw)->clear rmon channel 2
14-16 RMON Configuration
(Optional) Specifies the action of the filters on this channel as:
•
matched ‐ Packets will be accepted on filter matches
•
failed ‐ Packets will be accepted if they fail a match
(Optional) Enables or disables control of the flow of data through the
channel.
(Optional) Specifies a description for this channel.
(Optional) Specifies the name of the entity that configured this entry.
Specifies the channel entry to be cleared.
Advertisement
Table of Contents
