Show Port Protected Name; Clear Port Protected Name - Enterasys SecureStack B3 Configuration Manual

show port protected name

Mode
Switch command, read‐write.
Example
This example shows how to assign the name "group1" to protected port group 1:
B3(rw)->set port protected name 1 group1
show port protected name
Use this command to display the name for the group ids specified.
Syntax
show port protected name group-id
Parameters
group‐id
Defaults
None.
Mode
Read‐only.
Example
This example shows how to show the name of protected port group 1:
B3(ro)->show port protected name 1
Group ID
-----------------------------
1

clear port protected name

Use this command to clear the name of a protected group.
Syntax
clear port protected name group-id
Parameters
group‐id
Defaults
None.
5-50 Port Configuration
Specifies the id of the group to display. Id can range from 0 to 2.
Group Name
group1
Specifies the id of the group for which to clear the name. Id can range
from 0 to 2.