Required Tools, Materials, And Documents; Required Tools; Suggested Tools - Magtek ExpressCard 2000 Hardware Service Manual

1 - Required Tools, Materials, and Documents

1 Required Tools, Materials, and Documents
The tools and materials required for each procedure are listed in the procedure introductions, and in many
cases are included in the box with the replacement kit.
Additional tools, materials, documents, and software may be required (or helpful / suggested) depending
on the situation, and are listed in the subsections below as guidance for putting together a general-purpose
toolkit, a documentation and software set, and a reserve cache of materials, to bring to every service
appointment.
1.1

Required Tools

Part Number
N/A
N/A
67800019 or equiv.
N/A
N/A
N/A
N/A
1.2

Suggested Tools

Part Number
33011008
N/A
22350302 or equiv.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
ExpressCard 2000 / ExpressCard 3000| Instant Issuance Card Personalization System | Hardware Service Manual
Quantity
1 ea. Any tools specified in each procedure you will perform
1 ea. Device top cover key
1 ea. Small USB keyboard with touchpad mouse (if calibrating)
1 ea. ESD grounding wrist strap
1 ea. ESD mat and/or ESD bags
1 ea. USB thumb drive with required software and documentation
1 ea. Thin-tipped permanent marker
Quantity
1 ea. ASM TOOL KIT, FIELD SERVICE, EC2000, EC3000
1 ea. Laptop with available Ethernet port
1 ea. 10 ft. Ethernet cable (COM ETHERNET CAT5E BLK 10')
1 ea. Pen or pencil
1 ea. Paper and clipboard
1 ea. Flashlight
1 ea. Digital camera or smartphone with camera
1 ea. Needle nose pliers
1 ea. Hemostat pliers
1 ea. Scissors
1 ea. Box cutter
1 ea. Cable tie tool with adjustable tension
1 ea. Multimeter
Flex Phillips screwdriver OR
1 ea.
Electric screwdriver with flex extension
Page 13 of 356 (D99875607-91)
Description
Description