Magtek ExpressCard 2000 Hardware Service Manual page 329

6 - Adjustments
9) Press the button and wait about 10 seconds until the printer stops making sounds.
Reset Printer
6.3.3 How to Calibrate Image Alignment
The ExpressCard image printer's factory settings are calibrated to within 0.01" (1/100") of a reference
image, which is finer than can be seen by the human eye. This is also the maximum resolution of the
ExpressCard card design XML files. Because of this, MagTek does not prescribe any additional printer
alignment on the ExpressCard line at this time.
ExpressCard 2000 / ExpressCard 3000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 329 of 356 (D99875607-91)