Delta ASDA-A3 Series User Manual page 363

Parameters
P4.012
Default:
8
Unit:
Format:
Settings:
Manually adjust the offset. The function must be enabled by setting P2.008. Do not change the auxiliary
adjustment as this parameter cannot be reset.
P4.013
Default:
Unit:
Format:
Settings:
Manually adjust the offset. The function must be enabled by setting P2.008. Do not change the auxiliary
adjustment as this parameter cannot be reset.
P4.014
Default:
Unit:
Format:
Settings:
Manually adjust the offset. The function must be enabled by setting P2.008. Do not change the auxiliary
adjustment as this parameter cannot be reset.
P4.015
Default:
Unit:
Format:
Settings:
Manually adjust the offset. The function must be enabled by setting P2.008. Do not change the auxiliary
adjustment as this parameter cannot be reset.
8-106
Analog speed input (2) offset adjustment
Factory setting
-
DEC
Analog torque input (1) offset adjustment
Factory setting
-
DEC
Analog torque input (2) offset adjustment
Factory setting
-
DEC
Current encoder (V1 phase) offset adjustment
Factory setting
-
DEC
Control mode: All
Setting range: 0 – 32767
Data size: 16-bit
Control mode: All
Setting range: 0 – 32767
Data size: 16-bit
Control mode: All
Setting range: 0 – 32767
Data size: 16-bit
Control mode: All
Setting range: 0 – 32767
Data size: 16-bit
ASDA-A3
Address: 0418H
0419H
Address: 041AH
041BH
Address: 041CH
041DH
Address: 041EH
041FH
Revision December, 2017