Delta ASDA-A3 Series User Manual page 278

ASDA-A3
2. When PH = PL = P, it indicates that P0.025 has one 32-bit parameter.
Example: Target: set P6.010 to 0x00050064 in the mapping parameter.
P0.036
Default: -
Unit: -
Format: HEX
Settings:
High-bit
Position of
P0.036
mappin g p arameter
Content of
P0.026
mappin g p arameter
P0.037
Default: -
Unit: -
Format: HEX
Settings:
High-bit
Position of
P0.037
mappin g p arameter
Content of
P0.027
mappin g p arameter
Revision December, 2017
Setting: set both the high bit and low bit of P0.035 to 060A (P6.010).
Thus, P6.010 = 0x060A060A.
P6.010
P0.035
Write: in the mapping content, set P0.025 to 0x00050064 and P6.010 changes
immediately.
Target setting for mapping parameter P0.026
Low-bit
Position of
mappin g p arameter
Content of
mappin g p arameter
Target setting for mapping parameter P0.027
Low-bit
Position of
mappin g p arameter
Content of
mappin g p arameter
P6.010
Control mode: All
Setting range: Determined by the communication
address of the parameter group
Data size: 32-bit
Control mode: All
Setting range: Determined by the communication
address of the parameter group
Data size: 32-bit
Parameters
Address: 0048H
0049H
Address: 004AH
004BH
8-21
8