Delta ASDA-A3 Series User Manual page 275

Parameters
P0.025
Default:
8
Unit:
Format:
Settings:
You can continuously read and write parameters faster if they are not in the same group. You can use
P0.035 to specify the mapping parameter number through the panel or communication. The value of the
parameter that is specified by P0.035 is shown in P0.025. Please refer to P0.035 for its settings.
P0.026
Default:
Unit:
Format:
Settings:
This setting is the same as P0.025, except its mapping target is set in P0.036.
P0.027
Default:
Unit:
Format:
Settings:
This setting is the same as P0.025, except its mapping target is set in P0.037.
P0.028
Default:
Unit:
Format:
Settings:
This setting is the same as P0.025, except its mapping target is set in P0.038.
8-18
■
Mapping parameter #1
-
-
HEX
■
Mapping parameter #2
-
-
HEX
■
Mapping parameter #3
-
-
HEX
■
Mapping parameter #4
-
-
HEX
Control mode: All
Setting range: Determined by the corresponding
parameter P0.035
Data size: 32-bit
Control mode: All
Determined by the corresponding
Setting range:
parameter P0.036
Data size: 32-bit
Control mode: All
Setting range: Determined by the corresponding
parameter P0.037
Data size: 32-bit
Control mode: All
Determined by the corresponding
Setting range:
parameter P0.038
Data size: 32-bit
ASDA-A3
Address: 0032H
0033H
Address: 0034H
0035H
Address: 0036H
0037H
Address: 0038H
0039H
Revision December, 2017