Delta ASDA-A3 Series User Manual page 341

Parameters
Bit 0: DI/DO data unit setting
0: PUU
1: Pulse
8
Bit 1: communication data unit setting
0: PUU
1: Pulse
Bit 2: overflow warning setting
0: overflow warning, including AL289 (PUU) and AL062 (pulse)
1: no overflow warning
Bit 3 – Bit15: reserved; set to 0
P2.071■
Default:
Unit:
Format:
Settings:
When P2.071 is 1, the current absolute position of the encoder is the home position.
Clearing this function is enabled by setting P2.008 to 271.
P2.072
P2.073
Default:
Unit:
Format:
Settings:
D
BA
DC
h
YX: range of filter (0 – 95%)

When DI.ALGN is triggered, the E-Cam alignment function is enabled. The system detects the
current E-Cam position. When the differnce between the current E-Cam position and its previous
alignment position is less than the parameter's range as a percentage, the filter function is enabled.
Otherwise, the system uses the new position to do the alignment.
8-84
Absolute position homing
0x0
-
HEX
Reserved
E-Cam alignment - Operation
0x00000000
-
HEX
C B A
PR number
Masking range (0 – 95%)
High bit
Control mode: All
Setting range: 0 – 1
Data size: 16-bit
Control mode: PR
Setting range: 0x00000000 – 0x5F3F6F5F
Data size: 32-bit
UZ YX
YX Range of filter (0 – 95%)
Maximum allowable correction rate
UZ
(0 – 100%)
L Low bit
ASDA-A3
Address: 028EH
028FH
Address: 0292H
0293H
Revision December, 2017