Configuration Example Of The Triple Play Service - Multiple Pvcs For Multiple Services - Huawei SmartAX MA5616 Configuration Manual

SmartAX MA5616 Multi-service Access Module
Configuration Guide
quit
save
9.5.3 Configuration Example of the Triple Play Service - Multiple
PVCs for Multiple Services
This topic describes how to configure the triple play service in the multi-PVC for multiple
services mode.
Prerequisites
Before configuring the triple play service, make sure that:
l
l
l
l
Service Requirements
l
l
l
l
Networking
Figure 9-16
services mode.
Issue 04 (2011-10-30)
The network devices and lines are in the normal state.
The CPE is already configured (the CPE supports different PVCs for different services).
All boards of the device run in the normal state.
The VDSL2 line template and alarm template that are bound to the port are already
configured. For details on the configuration procedure, see
Profile.
The MA5616 is used on the GE upstream transmission network.
VDSL2 user 1 and VDSL2 user 2 are connected to the MA5616 to implement the triple
play.
The Internet service is provided in the PPPoE mode.
After receiving different traffic streams, the MA5616 provides different QoS guarantees
to the traffic streams according to the traffic priorities in the PVC.
shows the example network of the triple play service in the multi-PVC for multiple
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Configuration Example of Services on the MA5616
Through GE Upstream Transmission
3.7.3 Configuring the VDSL2
474