Table of Contents
Advertisement
SmartAX MA5616 Multi-service Access Module
Configuration Guide
----End
Example
To configure MG0 to support the emergency standalone function and configure the digitmap
for internal calls as 8764XXXX, do as follows:
huawei(config)#interface h248 0
huawei(config-if-h248-0)#mg-software parameter 11 1
huawei(config-if-h248-0)#display mg-software parameter 11
-------------------------------------------------
Interface Id:0
-------------------------------------------------
APPENDIX:
-------------------------------------------------
huawei(config-if-h248-0)#digitmap set inner 8764XXXX
huawei(config-if-h248-0)#display digitmap
-----------------------------------------------------------------------------
Inner digitmap
Urgent digitmap (for overload or bandwidth restrict)
Dualdial digitmap for card service
-----------------------------------------------------------------------------
Issue 04 (2011-10-30)
NOTE
In general, the default parameters of the emergency standalone timers are used, and you need not configure
them.
Interface software parameter name:
11: Stand alone flag
0: None
1: Inner
2: Emergency
3: Both
NOTE
The configured digitmap corresponds to the user phone number.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
para index:11
value:1
7 Configuring the Voice Service
: 8764XXXX
: -
: -
313
Hide quick links:
Advertisement
Table of Contents
