Table of Contents
Advertisement
SmartAX MA5616 Multi-service Access Module
Configuration Guide
VLAN
Type
MUX
VLAN
l To add VLANs with consecutive IDs in batches, run the vlan vlanid to end-vlanid command.
l To add VLANs with inconsecutive IDs in batches, run the vlan vlan-list command.
Step 2 (Optional) Configure the VLAN attribute.
The default attribute for a new VLAN is "common". You can run the vlan attrib command to
configure the attribute of the VLAN.
Configure the attribute according to VLAN planning.
Table 5-5 VLAN attributes and application scenarios
VLA
N
Attri
bute
Com
mon
Issue 04 (2011-10-30)
Configuration
Command
To add a MUX VLAN,
run the vlan vlanid
mux command.
NOTE
Configuration
Command
The default
attribute for a new
VLAN is
"common".
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Configuring the xDSL Internet Access Service
VLAN Description
One MUX VLAN may
contain multiple
upstream ports but only
one service port. The
service ports in different
VLANs are isolated.
One-to-one mapping can
be set up between a MUX
VLAN and an access
user. Hence, a MUX
VLAN can identify an
access user.
VLAN Type
VLAN
Description
The VLAN with
A VLAN with the
this attribute can
common attribute
be a standard
can function as a
VLAN, smart
common layer 2
VLAN, or MUX
VLAN or function
VLAN.
for creating a layer
3 interface.
Application Scenario
MUX VLANs are
applicable to FE or
xDSL service access. For
example, MUX VLANs
can be used to identify
users.
Application
Scenario
Applicable to the
N:1 access
scenario.
162
Hide quick links:
Advertisement
Table of Contents
