Huawei SmartAX MA5616 Configuration Manual page 434

SmartAX MA5616 Multi-service Access Module
Configuration Guide
5.
Step 5 In the case of the VDSL access mode, follow this procedure.
In this example, the VDSL normal mode is used as an example. For how to configure a VDSL
profile in the VDSL TI mode, see
1.
2.
3.
Issue 04 (2011-10-30)
Set the maximum number of MAC addresses that can be learned by the service port is 16.
This parameter is to limit the maximum number of the MAC addresses that can be learned
by one account, namely the maximum number of the PCs that can access the Internet
through one account.
huawei(config)#mac-address max-mac-count service-port 2 16
Configure a VDSL profile. For details, see
(Normal Mode). Assume that the VDSL profile ID is 3, downstream rate is 2048 kbit/s,
channel mode is the interleave mode, maximum downstream interleave delay is 8 ms,
maximum upstream interleave delay is 2 ms, SNR margin is 6 dB, minimum downstream
INP is 4, and minimum upstream INP is 2.
huawei(config)#vdsl line-profile quickadd 3 snr 60 0 300 60 0 300
huawei(config)#vdsl channel-profile quickadd 3 path-mode atm interleaved-delay
8 2 inp 4 2 rate
128 10000 128 10000 2048 2048
huawei(config)#vdsl line-template quickadd 3 line 3 channel1 3 100 100
Activate the VDSL port. The access port is port 0/1/0, and VDSL line template 3 and the
default VDSL alarm template (alarm template 1) are bound to the port.
NOTE
By default, an ADSL port is in the activated state. Before binding a template to the port, you must deactivate
the port.
huawei(config)#interface vdsl 0/1
huawei(config-if-vdsl-0/1)#deactivate 0
huawei(config-if-vdsl-0/1)#activate 0 template-index 3
huawei(config-if-vdsl-0/1)#alarm-config 0 1
huawei(config-if-vdsl-0/1)#quit
Run the display traffic table ip command to query the traffic profiles that exist in the
system.
huawei(config)#display traffic table ip from-index
0
{ <cr>|to-
index<K> }:
Command:
display traffic table ip from-index
0
----------------------------------------------------------------------------
TID CIR(kbps) CBS(bytes) PIR(kbps) PBS(bytes) Pri Copy-policy
Policy
----------------------------------------------------------------------------
0 1024
pri
1 2496
pri
2 512
pri
3 576
pri
4 64
pri
5 2048
pri
6 off
pri
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Configuration Example of Services on the MA5616
3.7.3.2 Configuring the VDSL2 Profile (TI
3.7.3.1 Configuring the VDSL2 Profile
34768 2048
81872 4992 163744
18384 1024
20432 1152
4048 128
67536 4096 135072
off off
Through GE Upstream Transmission
69536 6 -
6 -
36768 0 -
40864 2 -
8096 4 -
0 -
off 0 -
Mode).
Pri-
tag-
tag-
tag-
tag-
tag-
tag-
tag-
423