Huawei SmartAX MA5616 Configuration Manual page 200

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Result
Check whether the bandwidths of the multicast user and multicast program are configured
correctly.
l
Issue 04 (2011-10-30)
Check whether the bandwidth of the multicast user is configured correctly.
huawei(config)#display igmp user all
{ <cr>||
<K> }:
Command:
display igmp user
all
Command is being executed, please
wait...
------------------------------------------------------------------------------
User Index Bind
Available
profiles
programs
------------------------------------------------------------------------------
0 -
8
------------------------------------------------------------------------------
Total: 1
huawei(config)#display igmp user
{ all<K>|extended-attributes<K>|user-index<U><0,191> }:0 //0 is the index of
the multicast user queried in the preceding part.
{ <cr>||
<K> }:
Command:
display igmp user
0
User
0/1/0
State
offline
Authentication
auth
Quick leave
based
IGMP flow ID
0
Video flow ID
0
Log switch
enable
Bind profiles
-
IGMP version
v3
Available programs
8
Global Leave
disable
User MaxBandWidth
is 10 Mbit/s.
Used bandwidth(kbps)
0
Used
bandwidth
to max bandwidth(%)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Configuring the Multicast Service (Multicast VLAN Mode)
State Auth Quick
leave
offline no-auth MAC-based 0
:
:
: no-
: MAC-
:
:
:
:
: IGMP
:
:
: 10240 //The bandwidth of the multicast user
:
:
IGMP Video Log
flow ID flow ID switch
0 enable
189