Labels For The Fiber That Connects The Device And The Odf; Figure C-8 Example Of The Label On The Optical Fiber Between Two Devices; Table C-3 Information On Labels Affixed To The Fiber Between The Device And The Odf - Huawei BBU3806 Installation Manual

Installation Manual – Hardware Installation
BBU3806 WCDMA Base Band Unit

Figure C-8 Example of the label on the optical fiber between two devices

"A01-01-05-05-R" indicates that the local end of the optical fiber connects to Optical
Receiving Interface 05 on Slot 5, Subrack 01 in the cabinet on Row A, Column 01 in the
equipment room.
"G01-01-01-01-T" indicates that the opposite end of the optical fiber connects to Optical
Transmitting Interface 01 on Slot 01, Frame 01 in the cabinet on Row G, Column 01 in
the equipment room
C.3.2 Labels for the Fiber that Connects the Device and the ODF
I. Meaning of the Label
Table C-3 shows the information on both sides of the labels affixed to the optical fiber
that connects the device and the ODF.

Table C-3 Information on labels affixed to the fiber between the device and the ODF

Content
MN-B-C-D-R/T
ODF-MN-B-C-R/T
Meaning
MN: cabinet number
B: subrack number
C: physical slot
number
D: optical interface
number
R: optical Rx
interface
T: optical Tx interface
MN: row number and
column number of
ODF
B: row number of the
terminal device
Huawei Technologies Proprietary
C-10
Appendix C Engineering Labels for Cables
Example
For example, A01
Numbered in bottom-up order with two
digits, for example, 01
Numbered in top-down and left-right
order with two digits, for example, 01.
Numbered in top-down and left-right
order with two digits, for example, 05
Numbered in the same rule as that of
the cabinets, for example, G01 is the
ODF of Row G and Column 01
Range from 01 to 99, for example,
01-01