Optional) Configuring The Ringing Mode Of An Mg Interface - Huawei SmartAX MA5616 Configuration Manual

Multi-service access module
Table of Contents

Advertisement

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Example
To configure software parameter 11 of H.248-based MG interface 0 to 1 so that the MG interface
supports emergency standalone and allows only internal calls, do as follows:
huawei(config)#interface h248 0
huawei(config-if-h248-0)#mg-software parameter 11 1
huawei(config-if-h248-0)#display mg-software parameter 11
-------------------------------------------------
Interface Id:0
-------------------------------------------------
APPENDIX:
-------------------------------------------------

7.1.1.6 (Optional) Configuring the Ringing Mode of an MG Interface

This topic describes how to configure the ringing mode of an MG interface to meet different
user requirements.
Context
Add the ringing mode mapping records of a specified MG interface. After the adding is
successful, the MG interface can obtains the ringing mode according to the peer parameters
issued by the MGC and then play the ringing to the user in this mode.
Procedure
Step 1 Check whether the ringing mode meets the requirements.
Check whether the preset ringing mode in the system meets the requirements according to the
Usage Guidelines of the mg-ringmode add command.
l If the preset ringing mode meets the requirements, go to
l If the preset ringing mode does not meet the requirements, proceed to
Step 2 Configure the user-defined ringing mode.
In the global config mode, run the user defined-ring modify command to configure the break-
make ratio of user-defined ringing mode to form a ringing mode that meets the user requirement.
The system supports 16 user-defined ringing modes, which can be modified but cannot be added
or deleted.
Step 3 Enter the MG interface mode.
Run the interface h248 command to enter the MG interface mode.
Step 4 Add a ringing mapping.
Run the mg-ringmode add command to add a ringing mapping.
Issue 04 (2011-10-30)
Interface software parameter name:
11: Stand alone support
0: None
1: Inner
2: Emergency
3: Both
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
para index:11
value:1
7 Configuring the Voice Service
Step
3.
Step
2.
227

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents