Huawei SmartAX MA5616 Configuration Manual page 138

SmartAX MA5616 Multi-service Access Module
Configuration Guide
The queue depth of the port is allocated on a percentage basis.
depths of the system.
Table 3-22 Queue depth allocation
Queue Number
7
6
5
4
3
2
1
0
Ln: Indicates the depth of queue n. The sum of all the queue depths must be equal to 100.
Procedure
Step 1 Run the queue-buffer command to configure the queue depth of the service board.
Step 2 Run the display queue-buffer command to query the queue depth of the current service board.
----End
Example
To set the queue depths to 20, 20, 10, 10, 10, 10, 10, and 10, do as follows:
huawei(config)#queue-buffer 20 20 10 10 10 10 10 10
huawei(config)#display queue-buffer
------------------------
Queue
------------------------
------------------------
Issue 04 (2011-10-30)
Depth size ratio
0 20
1 20
2 10
3 10
4 10
5 10
6 10
7 10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Queue Depth (Port
Supporting Eight Queues)
L7 (default: 6)
L6 (default: 25)
L5 (default: 12)
L4 (default: 12)
L3 (default: 13)
L2 (default: 13)
L1 (default: 6)
L0 (default: 13)
3 Basic Configuration
Table 3-22 lists the default queue
Actual Queue Number
(Port Supporting Four
Queues)
-
-
-
-
L7+L6 (default: 31)
L5+L4 (default: 24)
L3+L2 (default: 26)
L1+L0 (default: 18)
127