Huawei SmartAX MA5616 Configuration Manual page 461

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Step 5 Configure the static route.
huawei(config-voip)#quit
huawei(config)#ip route-static 10.14.0.0 16 10.13.1.1
Step 6 Add an MG interface.
huawei(config)#interface h248 0
Are you sure to add MG interface?(y/n)[n]:y
Step 7 Configure the attributes of the MG interface.
huawei(config-if-h248-0)#if-h248 attribute mgip 10.13.4.116 mgport 2944 code
text transfer udp MIDType domainName domainName MA5616.com primary-mgc-ip1
10.14.1.2
primary-mgc-port 2944 mg-media-ip1 10.13.4.116 start-negotiate-version 2
Step 8 Reset the MG interface.
huawei(config-if-h248-0)#reset coldstart
Are you sure to reset MG interface?(y/n)[n]:y
Step 9 Configure the working mode of the ISDN BRA port.
huawei(config-if-h248-0)#quit
huawei(config)#braport
huawei(config-braport)#braport attribute set 0/4/0 workmode p2mp
huawei(config-braport)#braport attribute set 0/4/1 activemode stable-active
workmode p2p
Step 10 Add an IUA link set and IUA links.
huawei(config-braport)#quit
huawei(config)#sigtran
huawei(config-sigtran)#iua-linkset add 0
huawei(config-sigtran)#iua-link add 0 0 1401 10.13.4.116 1400 10.14.1.2
Step 11 Add an ISDN BRA user and configure the data.
huawei(config-sigtran)#quit
huawei(config)#esl user
huawei(config-esl-user)#mgbrauser add 0/4/0 0 0 interfaceid 0 terminalid 2 priority
cat3 telno 83110001
Are you sure to configure the working mode of the DSL board to normal and reset
the board automatically? (y/n)
[n]:y
huawei(config-esl-user)#mgbrauser add 0/4/1 0 0 interfaceid 2 terminalid 4 pr
iority cat1 telno 83110002
Step 12 Save the data.
huawei(config-esl-user)#quit
huawei(config)#save
----End
Result
l
Issue 04 (2011-10-30)
NOTE
Ensure that the to-be-configured media/signaling IP address of the MG interface must exist in the
corresponding address pool. You can run the display ip address command to query the in formation about
the media IP address pool or the signaling IP address pool.
NOTE
In the point to point mode, the L1 activemode of the ISDN BRA port must be set to stable-active to make
the configuration take effect.
ISDN phone1 and ISDN phone2 can communicate with ISDN phone3 by dialing number
83110002.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Configuration Example of Services on the MA5616
Through GE Upstream Transmission
450