Huawei SmartAX MA5616 Configuration Manual page 290

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Parameter
7
11
Issue 04 (2011-10-30)
Description
Indicates whether the MG
interface supports security
header.
To configure an MG interface
to or not to support security
header, use this parameter.
After configuring the security
header, run the auth(h248)
command to configure the
authentication parameters, and
then run the reset(h248)
command to reset the MG
interface. In this case, the MGC
can manage the MG devices in
a security manner, ensuring that
the data is complete.
Indicates whether the MG
interface supports emergency
standalone.
To configure whether an MG
interface supports emergency
standalone, use this parameter.
If the MG interface supports
emergency standalone, the
users on the MG interface can
make phone calls even if the
MG fails to communicate with
the MGC.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Configuring the Voice Service
Default Setting
Numeral type. Range: 0-1.
l 0: Indicates that security
header is supported.
l 1: Indicates that security
header is not supported.
Default: 1
Numeral type. Range: 0-3.
l 0: Indicates that no call is
permitted.
l 1: Indicates that only internal
call is permitted.
l 2: Indicates that only
emergency call is permitted.
l 3: indicates that internal call
and emergency call are
permitted.
Default: 0
279