Huawei SmartAX MA5616 Configuration Manual page 465

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Item
Procedure
Step 1 Create VLANs.
Network-side VLAN IDs are 100 and 101, and the VLAN type is smart VLAN.
huawei(config)#vlan 100-101 smart
It will take several minutes, and console may be timeout, please use command
idle-timeout to set time limit
Are you sure to add VLANs? (y/n)[n]:y
The total of the VLANs having been processed is 2
The total of the added VLANs is 2
Step 2 Set the VLAN attribute to stacking VLAN.
huawei(config)#vlan attrib 100-101 stacking
It will take several minutes, and console may be timeout, please use command
idle-timeout to set time limit
Are you sure to continue? (y/n)[n]:y
The total of the VLANs having been processed is 2
The total of the VLAN(s) which have been operated successfully is 2
Step 3 Add an uplink port to the VLAN.
Add uplink port 0/0/1 to VLAN 100 and VLAN 101.
huawei(config)#port vlan 100-101 0/0 1
It will take several minutes, and console may be timeout, please use command
idle-timeout to set time limit
Are you sure to add standard port(s)? (y/n)[n]:y
The total of the VLANs having been processed is 2
The total of the port VLAN(s) having been added is 2
Step 4 Add service ports to VLANs.
Create service ports for users 1, 2, 3, and 4, and then add the service ports to VLAN 100 and
VLAN 101.
huawei(config)#service-port 1 vlan 100 vdsl mode ptm 0/1/0 multi-service user-encap
pppoe
rx-cttr 6 tx-cttr 6
huawei(config)#service-port 2 vlan
encap pppoe
rx-cttr 6 tx-cttr 6
huawei(config)#service-port 3 vlan 101 vdsl mode ptm 0/1/2 multi-service user-encap
pppoe
rx-cttr 6 tx-cttr 6
huawei(config)#service-port 4 vlan 101 vdsl mode ptm 0/1/3 multi-service user-encap
Issue 04 (2011-10-30)
NOTE
You can run the stacking outer-ethertype command to set the type of outer Ethernet protocol supported
by VLAN stacking on the MA5616. You can also run the stacking inner-ethertype command to set the
type of inner Ethernet protocol supported by VLAN stacking on the MA5616. To ensure that Huawei device
is interconnected with the device of other vendors, the type of the inner/outer Ethernet protocol must be
the same as that of the interconnect device.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Configuration Example of Services on the MA5616
Through GE Upstream Transmission
Data
User 4:
l Access port: 0/1/3
l Inner VLAN tag: 12
100 vdsl mode ptm 0/1/1 multi-service user-
454