Huawei SmartAX MA5616 Configuration Manual page 370

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Figure 8-8 Example network of the VoIP PSTN service based on the SIP protocol
Data Plan
Run the display system parameters and display oversea parameters commands to query the
system parameters and overseas parameters. If the parameter settings do meet the requirements,
run the system parameters and oversea parameters commands to set the parameters to the
required values.
In this example, the MA5616 is used in China. The default configurations of system parameters
and overseas parameters can meet the standard and application requirements. Therefore, you
need not configure these parameters.
Table 8-4
protocol.
Table 8-4 Data plan for configuring the VoIP PSTN service based on the SIP protocol
Item
SIP interface
Local digitmap
Issue 04 (2011-10-30)
provides the data plan for configuring the VoIP PSTN service based on the SIP
SIP interface ID
Digitmap name
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Configuration Example of Services on the MA5616
Through GPON Upstream Transmission
Data
0
huawei0 and huawei1
359