Huawei SmartAX MA5616 Configuration Manual page 480

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Item
Traffic
profile
parameters
Uplink port
ID
Upstream
VLANs
User-side
802.1p
priorities
IGMP
version
Multicast
source
Multicast
program
library
Right profile
Multicast
users
Upstream
priority
Configuration Flowchart
Figure 9-15
multiple services mode based on the user-side 802.1p priority.
Issue 04 (2011-10-30)
Data
Internet service: 1 Mbit/s
VoIP service: 64 Kbit/s
IPTV service: no limit
0/0/1
Internet service: smart VLAN 102
VoIP service: smart VLAN 103
IPTV service: smart VLAN 104
Internet service: 2
VoIP service: 3
IPTV service: 4
IGMP v3 (default IGMP version in the multicast VLAN mode)
Two multicast sources:
ISP 1: with IP address 10.10.10.10, providing the multicast program with IP
address 224.1.1.1
ISP 2: with IP address 10.10.10.11, providing the multicast program with IP
address 224.1.1.2
Programs in multicast VLAN 104:
Program 1: with IP address 224.1.1.1, the program source IP address being
the same as the IP address of ISP 1 (10.10.10.10)
Program 2: with IP address 224.1.1.2, the program source IP address being
the same as the IP address of ISP 2 (10.10.10.11)
Set right profile 0. Profile 0 has the right to watch program 1 in the program
library.
User 1: User 1 (on port 0/3/0) can watch all the programs.
User 2: User 2 (on port 0/3/1) can watch only program 1.
The 802.1p priorities are used. The VoIP service has priority 6, IPTV service
priority 5, and Internet service priority 1.
shows the flowchart for configuring the triple play service in the single-PVC for
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Configuration Example of Services on the MA5616
Through GE Upstream Transmission
469