Huawei SmartAX MA5616 Configuration Manual page 501

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Servic
e
Classif
ication
Issue 04 (2011-10-30)
Item Data
Index of the profile
used by the MG
interface
SIP interface SIP interface ID: 0
(SIP)
NOTE
The
parameters
Signaling port ID of
of the SIP
interface the SIP interface:
must be the
5056
same as the
parameters
IP address of the
on the
primary softswitch
softswitch.
to which the SIP
SIP has
interface belongs:
many
200.200.200.200/24
negotiation
parameters,
Port ID of the
and the
parameters primary softswitch
here are
to which the SIP
mandatory.
interface belongs:
5060/24
Coding mode of the
SIP interface: text
Transmission mode
of the SIP interface:
UDP
Home domain of the
SIP interface:
huawei
Index of the profile
used by the SIP
interface: 1
PSTN users phone1-phone24:
83110001-8311002
4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Configuration Examples of the FTTx
Remarks
Different profile indexes are used for
interconnection with non-Huawei
softswitches. You can run the if-h248
attribute profile-index command to query
the profile index. For interconnection with
a ZTE softswitch, use profile 5; for
interconnection with a Bell softswitch, no
constant profile is used. Profile 0 can be
used and the data is negotiated with the Bell
softswitch.
It is the SIP interface ID used for the VoIP
service to be configured, which determines
the virtual access gateway (VAG) specified
for the user.
-
When dual homing is configured, the IP
address and the port ID of the secondary
softswitch must also be configured.
-
The transmission mode is selected
according to the requirements on the
softswitch. Generally, UDP is adopted.
-
-
-
490