Huawei SmartAX MA5616 Configuration Manual page 27

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Figure 3-6 HyperTerminal interface
Step 4 Set the terminal emulation type.
Choose File > Properties on the HyperTerminal interface. In the dialog box that is displayed,
click the Settings tab, and set the terminal emulation type to VT100 or Auto detect. Use default
values for other parameters. Then, click OK, as shown in
Issue 04 (2011-10-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Basic Configuration
Figure 3-7.
16