Huawei SmartAX MA5616 Configuration Manual page 222

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Item
Voice service
data
(The data
configuration
must be
consistent with
the data
configuration
on the MGC.)
Issue 04 (2011-10-30)
TID Format of an MG
Interface
Slot that houses the voice
service board
User Data Phone number
TID
User priority
User type
System Parameters
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Configuring the Voice Service
Remarks
The TID format determines the
generation mode of various types of
user terminals on an MG interface.
-
The phone numbers allocated by the
MGC need to be determined, and the
paging numbers for users' emergency
standalone need to be planned if the
emergency standalone function is
provided.
If the TID template with which the
PSTN user is bound does not support
terminal layering, this parameter needs
to be configured.
According to the service requirements,
the user priority needs to be specified.
The user priorities are as follows:
l cat1: government1 (category 1
government users)
l cat2: government2 (category 2
government users)
l cat3: normal (common users,
default priority in the system)
According to the service requirements,
the user type needs to be specified. The
user types are as follows:
l DEL: direct exchange lines (default
type in the system)
l ECPBX: earth calling PBX
l LCPBX: loop calling PBX
l PayPhone: pay phone
The system parameters including the
overseas version flag and message
waiting indication (MWI) mode need to
be configured according to the local
standards to ensure that the response of
the user terminal complies with the
local standards.
211